1967 Chevrolet C-10

Standard Cab Pickup

Originally Straight 6 (no motor)

Manual

KS147B126939

Clear

Gasoline

You're looking at a factory shortbed (frame matches VIN matches SPID) 1967 K10 4x4 truck. This truck adorns a small window cab (last year for it was '67) and a cool stepside bed. As you can see, this truck is fairly unique, especially with the low production numbers of these trucks in this configuration. Speaking of, this truck left the factory as a straight 6 (no longer present), "3 on the tree" manual transmission (trans is present) torque beast. While it does have some typical rust (rockers, cab corners, front fender cups, driver fender, cab brace and a spot right behind bumper on frame), this truck appears to be solid in the windshield/visor area, firewall, floor pans, and cab mounts. The interior is mostly complete (minus seat). You can either drop a motor in and go or take it to the next level with a full-blown restoration. - the truck will be sold with bill of sale only- it DOES NOT run and will need to be towed- wheels/tires spin freely for easy winching onto a trailerOn Jan-20-18 at 09:09:08 PST, seller added the following information: This truck still has all of the factory 4x4 suspension and has the transfer case intact with the transmission. It is, however, missing the front driveshaft. The rear driveshaft is there. Additionally, upon further inspection, the driver's floorpan has been patched but appears to be solid. Any other questions, please ask. On Jan-20-18 at 09:10:36 PST, seller added the following information: Furthermore, if you have less than 10 feedback, you must contact me BEFORE placing a bid or i will have to cancel your bid upon placing it. On Jan-20-18 at 11:48:42 PST, seller added the following information: Front driveshaft has been found and will be included.