1963 Chevrolet Corvette

Coupe

none

30837S113350

Clear

Up for sale is a 1963 Corvette Split window coupe project which was started about 1 year ago. Car was a barn find that needed a complete restoration. Here is a chance to own a 1963 Corvette Split Window Resto Mod with all the hard work already done. Car just need to be painted as it was an original Red car. Please see my design renderings of how I was planning to build the car. * Complete Rolling Chassis with Wheels ( See Pictures) C2 corvette chassis with C7 suspension chassis with c5 differential custom built by Chassis Concepts. Includes brake lines, fuel lines, brakes, rotors and red calipers. Please contact Ray at Chassis Concepts, *Chassis Concepts also provided a modified rear panel for the tubs * Side vents will have custom polished spears designed to fit inside side per the rendering. *Car is located in Arizona at Hedges Corvettes -all body work has been completed ready for paint. Lizard Skin for the interior will be provided. All bumpers and stainless and trim has been polished or chromed. Please call 4792369012 to make an appointment to see the project. All fiber Glass work has been completed and the front clip was replaced and installed. Car will include a new Hood, all new hinges, doors and all other hard to find trim included with Build. NEW Vent Glass, new door Glass, new Windshield and rear glass I have all interior and exterior parts including glass, Dakota digital gauges, seats, door panels all hard to find interior trim. I have the wire harness as well and a few items for the center console has been corban fibered as a few items are in the pictures Exterior- I have all chrome already re chromed or new, I have head lights tail lights and all emblems needed to complete car once painted. All these items are located with the car at Hedges Corvette. Please feel free to call or text me to make an offer as there has been a lot of work already completed and all parts have been purchased. 2819248512 Serious inquiries only as you all know what it cost for a 1963 Corvette Split Window Coupe!! The chassis with, Brakes, Rotors and red calipers with the Wheels cost over $25,000.00 Plus the car 50,000.00 Plus the parts both interior and exterior $18,500.00 Plus the labor to do all the fiber glass and body work $12,000.00. Please make an offer as the car has to sell by Friday to complete a project for my firm. I understand I will not get all my money back, however, I am saving you a year worth of labor and time to find all the parts. The only parts I do not have is the engine and Transmission. If needed, an LS3 Engine and transmission would add $9500.00 if needed with less than 15k milles on Engine. Please send info and I can have Rodger send you pictures and miles of the engines and trans packages. BACK TO HOMEPAGE 2017 - CHASSIS CONCEPTS BUILD PROCESS SEE PICTURES C2/C7 Corvette Conversion Frame 2017 "C7" Suspension See pictures at bottom of the page "THE EVOLUTION" of the C2/C7 Conversion Chassis At first, we considered using C5 Suspension because of the multitude of used parts available. But then, we realized that we would be Two Generations old with a "New Product". That is why we chose to build the "New Chassis" with 2017 - C7 Suspension. After much research,we were able to gather all of the Part Numbers to order a complete front and rear set of C7 Suspension. We were able to purchase another set of used suspension from VetteWrecks out of a Fire/Salvage 2015 Corvette, to do our initial chassis geometry. Chuck Ryan also lent us a front "cut-off" (see pictures) from a flood/salvage, so that we could set up exact suspension pick-up points on the chassis. After building the New Perimiter C2/C7 Chassis, the L/S motormounts are tacked in place along with the lower suspension plate. This will asure proper motor placement and clearance with the new suspension. The removable center cross-member and 3rd cross-member are installed to maintain Chassis rigidity. The next thing to do, was to setup a full width jig. This will allow us to keep the exact GM Geometry, when we narrow the tread width to that of a 63-67 C2 Corvette. Once this is accomplished, we can align the two jigs to the correct width. We can then build a reverse jig, that will allow us to relate the suspension mounting points to the chassis. This process will be repeated with the rear suspension, with the addition of the differential engineering. We are using a C5 Differential (instead of the Viper C4 Differential) to maintain the character of the "Newer Generations". This also allows us more tire width, and greater flex ability in the placement of the rear. It also allows the use of inner and outer CV Joints, as the unit was designed. MORE TO COME ! ! Replaces the 63 - 67 Corvette Chassis Body Modifications are required to the floor behind the seats - NOTE: MY CHASSIS INCLUDES THIS PANEL PER LISTING ABOVE -- DESCRIPTION -- 1963-67 Base C2/C7 Corvette Replacement Chassis with 2017 "C7" Suspension Geometry and Mounting Brackets Chemical Wash and Metal Prep Chassis Media Blast and Metal Prep Chassis Prime Powdercoat and UV Protected Gloss Black Powdercoat Modify Rear Suspension Components L/S Motor Mount Position Removable Center Transmission Crossmember Custom Detroit Speed Power Rack and Pinion Steering Optional - 24" D/D Bar, Metric-3/4 D/D Universal, 9/16-3/4D/D Universal NEW GM 2016 Front C7 Suspension - w/ Custom Swaybar Aldan American Eagle Coilover Shocks w/ 400lb Springs Chassis Concepts Custom Lower Coilover Adapter Mount NEW GM 2016 Rear C7 Suspension - w/ Custom Swaybar Modified C5 Rear Differential Assembly Chassis Concepts Differential Adapter and Front Support Aldan American Eagle Coilover Shocks w/ 300lb Springs Chassis Concepts Custom Lower Strut Shafts Chassis Concepts Custom Lower Coilover Adapter Mount Modify Rear Adjustable Toe Assembly Red Powder Coated C7 Front Calipers Red Powder Coated C7 RearCalipers C7 Semi Mettalic Brake Pads Complete Set of C7 New Rotors and Small Parts Kit Drilled and Slotted Rotors w/ PowerStop Ceramic Pads Stainless Steel Brake Lines and Adapters Stainless Steel Braided Flex Lines and Fittings Stainless Steel L/S Style line w/ Return Filter/Regulator ************************************************************************************************************************************** ************************************************************************************************************************************** On Dec-30-16 at 03:44:19 PST, seller added the following information: Here is the address where the car is located for you to see and see the parts included. Please let me know if you have any more questions. Please make me an offer to get the car sold today and that you again for the information. All the fiberglass work has been completed and the new front clip has been installed per the pictures. I also have the rear replacement panel in order to fit the new Chassis. Hedges Corvettes1303 Concord Street Lowell, Arkansas 72745 USA On Dec-30-16 at 12:45:22 PST, seller added the following information: Car location and Pick up: Hedges Corvettes1303 Concord Street Lowell, Arkansas 72745 USA