1986 Chevrolet S-10

none

1gccs14e2g2147485

Clear

I have 1986 Chevy s10 project truck. It did have a 350 in it at one time. But there is NO motor or transmission in the truck now and it does not come with any. With that said there is alot done to this truck that would make for a good truck to finish or use as a frame swap. It does have v8 motor mounts in it. Also comes with drive shaft. The body is in good shape. It has all the door handles and locks shaved. It has remote door poppers installed. They did work last time it had a battery hooked up. The mirrors are also shaved. If you don't like the doors like that you could swap them out for another set of stock doors. The tailgate is fixed and molded into bed, so does not open anymore. Has a roll pan also all molded in. Has a good bed cover but it is missing a couple bows. The hood is stock steel with a hood scoop molded on and hole cut out over engine for more clearance. Cab has new carpet in it and a newer seat. Has a sliding rear window. It did have a ratchet shifter on floor but no longer there. Looks like the passenger side floor had a bad spot that has been patched not the greatest job though. Paint does have some scratches and some of body work on tailgate is coming undone. Over all body clean and solid. It does have a different rear end in it. I think its from a s10 zr2. It is wider than the stock 2wd s10. and it has disc brakes.It is a limited slip. i think 3.73 gears. It is all hooked up. I have seen just those rear ends sell for $400. Has nice chrome grille and headlight surrounds. I have headlight buckets but no lights. Only body piece missing is the cowl piece between front bumper and grille. It has newer style s10 rims from i think around a 2000 model. It has 215/70/r15 tires on the front and 265/70/15 tires on the rear. This would be a great truck to go drag racing with or make into a nice street truck. Truck has a long bed which makes it nice to use the frame to do a body swap with a 1941-1955 chevy truck. Then just part the body out. Has lots of options and potential. I do have a clear ohio title to go with the truck. I can get more pictures of anything you would like just let me know. You are welcome to look at it in person. Truck will need to be trailered. Please let me know any questions you may.On Dec-17-14 at 09:38:58 PST, seller added the following information: I did some research on the rear end. There are 3 different sizes. Stock s10 2wd is 54.5" from wheel mounting plate to wheel mounting plate. The next one is 59" wide which is in the 4x4 models s10 and blazers and then the third is the widest one which is 63" wide the zr2. The one that is in this truck is the middle one 59" wide. So it is the right rear end for the 47-54 chevy body swaps.On Dec-17-14 at 10:08:31 PST, seller added the following information: Can look at theses two websites for more info on chassis swaps. e-zchassisswaps.com/index.php ad-engineering.com/HOMEPAGE.html