1941 Ford Other

2 Door

1997 4.6 sohc

Automatic

Clear

Gasoline

for sale here is a project I have been working on for a few years when I have time. I have done tons of work and it is coming together rather well in my opinion. My issue is with family and work I just have not worked on it in quite a while. It is time to pass it on to someone who will finish it and hopefully enjoy it with their family. suspension: Chassis engineering ez rider drop axle front suspension system.front sway bar option46-48 panhard bar bracketsplit wish bones with 40style bracketsall front components powder coated matte blackfull needle/roller kingpins installed rear suspension: chassis engineering parrallel leaf kit.8" ford rear end with 3.50 ratio(new axle bearings and seals)sway bar option includded and installed brakes: new disk brake kit installedstainless brake hose kit with caliper adapters.new power brake master/booster combo installednew disk/drum proportioning valveadjustable prop valve (just in case tuning needed)roll of brake line,fitting,t's etc to complete brakes(rear shoes,cyls,drums needed still) engine: 1997 4.6 sohc efi, ran great when pulled from car with damage to quarter panel89xxx milesincluded is all engine wiring and pcm from1995 t-bird for the ease of install and lack of uneeded accys to complicate wiring it up.cold air kit installed and maf with big k&n filter in fender.aeroquip -6an fuel lines from engine to 3'below frame rail. (just needs lines finished to rear and add pump and filter)jw rod garage engine mounts cooling: alluminum radiator with trans cooler transmission: 1997 4r70w with 89xxx milesshifted fine and was fully functional when pulled from driving cardrive shaft included and does fit inside xframe and just will need the rear shortned and proper u-joint swapped for the 8" rear sheetmetal work: ems rear tail pan replacedems inner "tool box" Trunk floor cut out and new flat floor installedfront floor removable eliminated and custom front floor installed rockers need some attention when body is off frame for painting Glass: front windshield glass and trim are VERY reusable!!!rear glass and trim VERY reusableside glass is all needing replaced. trim: pass coul trim short piece is mangled.hood trim is included but not on car from when I cleaned and cleare the hoodall other trim as seen in picsthere are plenty of flaws but honestly I havent worried about it. interior: front seats that come with it are driver power and pass manual(probe)original needing recovered to match fronts rear seat included all interior window mouldings and dash are includedrear arm rest parts come with it. the body has been cleaned and flat cleared to preserve the 73 years of perfect patina.For me this needs nothing other than to be driven.i would not ruin it with some over the top paint job...period Steering: cut down omni rack installed but needing linkages finished.no steering column included but some u-joints and shafting materials are included This is a project. It does roll but needs finished and will need to be transported on a trailer or flatbed.Please ask any questions prior to bidding. I can get more pics of specific areas or angles if needed. 500$ deposit required within 24hrs of close of auction. I will help with loading.