1971 Plymouth Cuda

U/K

5.6L 340Cu. In. V8 GAS Naturally Aspirated

Manual

Clear

GAS

Please read the whole description before you bid.This is a 1971 cuda 340 all #'s matching project.This is a very rare car with the options,GA4 gunmetal grey,340,3 speed stick,Billboard car.As you will see in the pics,this car is a major project it needs everything! I have had this car for years & I am never going to get around to it so it is time to thin out the heard.I do hawever have a few new parts that go with it that I have picked up along the way.Included in the auction are:2 new left & right AMD quarter panels,new outer wheel houses,new trunk extentions,And a new under rear seat panel.I also have a new non remote miror for the drivers door,And forward light harness,And engine harness.I got this car & it was taken apart,The hood is gone,also the lower front vallence,header panel,passenger fender,and deck lid.I do have the marker lght assm. for the lower vallence, also included is a mint original lower vallence insert.I have the hood latch mech,& fender gilles.Also included is a pair of rust free non gilled fenders.All the seat cores are there including another build sheet under the passenger seat.I have another build sheet from the rear seat that is in a plastic cover.Yes I have 2 build sheets.All the glass is there with the exception of the front windshield.The original jack is there with the hook.All the seat belts are there,steering column,drive shaft,tail lights,headlight ring, grill,& noumerous other parts.The grill will need a few repairs as it has a few cracks.Also in one of the pics you will see the non snorkel original air cleaner,High flow manifolds,& original engine parts.The other picture shows the #'s matching 3 speed transmission,original intake manifold with 71 only thermoquad,& #'s matching motor.The short block was freshend up with new pistons, rings,bearings,& machine work,It has been sitting for a while & I would recomend taking it to a machine shop & haveing it gone over.The original heads are the need to have machine work done.As for the body it needs alot.I am not trying to hide anything! This is a very large project,It will nee left front frame rail,inner fender panels,cowl work at the lower windshield,full floor,trunk,trunk extentions,tail light panel,& rear pass. side frame rail work where it curves up & at the rear.plus noumerous patches.This car deserves to be saved as rare as it is.They only made 151 340 3 speed cudas in 1971,add to that the color,And the fact that tis car has bill boards.The door sticker,title that is from 1972,2 build sheets,cowl,block,dash,trans,are all mtching #'s.I do not have a fender tag for it.There is a smaal peice of it left but just the corners,with the build sheets you can have a duplicate made & be able to prove the options.I know that I am forgetting things but ask any questions before you bid please & I will be happy to answer them.I want this car gone so I will say that my reserve is below $10k.where else would you get a 71 #'s matching rare car for under 10K ? This car is for sale locally & I reserve the right to end the auction early.Email questions,check out my other auctions as I will be listing tons of parts,& cars.