1970 Plymouth Barracuda

Coupe

Unspecified

Unspecified

Gasoline

(please read before bidding) 1970 Barracuda Body mounted on a professionally built round tube chassis. Chassis was certified to 7:50. Rear is a 4-link with coil over shocks, Dana 60 with Strange spool, axles and 4:56 pro gears and large drum brakes. New Mark Williams Front struts with Wilwood disk brakes. The following are mounted on the chassis: Body, Struts, rear 4-link and wishbone locator, shock mounts, seat mount, Transmission mount, Steering, Peddle assembly (clutch and brake), Master cylinder, and radiator. The rear 1/4 panels have been streched, trunk gutters and deck filler were replaced with new panels. The entire shell and front clip were media blasted down to bare metal or fiberglass and the body was coated in SEM epoxy Primer to seal it before the 1/4s, gutters and deck filler were replaced. Front end mounting kit (New ART) Front grill assembly (Used, Fiberglass Repli Fiberglass Hood (Used) Fiberglass trunk (Used) Fiberglass doors (New, Need to be mounted, mounts included) Rear Bumper w/brackets (Original) Tail Lights (Original) Rear valance (Original) Front and rear Cragar Super Trick wheels. Kirkey Aluminum Race seat with mount. (New, no cover) ART Master cylinder (New, ART) Pedal assembly (New, Brake, gas and clutch, Chassis Engineering) NEW interior sheet metal panels from a Jegster Kit (New, not installed) Rear Strange single adjustable coil-over Rear wishbone locator. (new, Alston Chassiworks) Door weather stripping (Original) Dash assembly attached Front Aluminum Radiator assembly with Shrouded Dual Flex-a-lite fans (New) Rack and Pinion (New) Steering Column (New) Grant Steering wheel with quick disconnect. (new) Brake Plumbing Kit (New, ART) Window Chrome (Original) there is a lot of extras not listed This car has the potential to be a pro-street car also call if your serious only, no time to finish great deal. 754 368-0912 rob