1993 Ford Mustang

LX Hatchback

4 Cylinder 2.3 Liter

Manual

1facp41m2pf179334

Gasoline

AM/FM Radio

THIS 1993 LX HAS A 6 POINT ROLL CAGE, FRAME TIES, FUEL CELL AND REAR MOUNT BATT. WITH A REAR MOUNTED CUT OFF SWITCH AND A REAR FIREWALL INSTALLED. A WELL BUILT HEALTHY 306 WITH EXTENSIVE MACHINE WORK DONE TO THE STEEL GT40 HEADS, A VICTOR JR. INTAKE WITH A HOLLEY RACE PREPPED 650 DBL PUMPER, A HOLLEY FUEL PUMP WITH A AEROMOTIVE REGULATOR. MSD DIST. WITH A 6AL BOX AND COIL. BBK LONG TUBE HEADERS WITH MAC MUFFLERS AND DUMPS. A TREMIC 3650 5sp TRANS WITH A PRO 5.0 SHIFTER. THE 8.8 REAR HAS A GOOD STRONG TRAC LOCK WITH A 3.73 GEAR IT ALSO HAS THE EIBACH LAUNCH KIT WITH AIRBAG IN REAR SPRING. CAR HOOKS HARD AND GOES STRAIGHT. CAR COMES WITH FACTORY BLACK INTERIOR WHICH IS STILL IN FINE SHAPE IT WILL NEED A HEAD LINER TO BE A 9 OUT OF 10. IT DOES HAVE RACE FRONT SEATS IN IT WITH A 5 POINT HARNESS ON THE DRIVERS SIDE I DO HAVE THE FACTORY FRONT SEATS YOU CAN HAVE EITHER SET NOT BOTH. IT HAS AUTOMETER TACH AND OIL PRESSURE / TEMP OIL FIELD GAUGES. CAR HAS WELD WHEELS WITH NEWER NITTO DRAG RADIALS ON REAR. PAINT WAS DONE ABOUT A YEAR AGO, IT IS A GOOD BASE COAT CLEAR COAT JOB, IT LOOKS GREAT COULD LOOK A LITTLE BETTER WITH A WET SAND AND BUFF AS IT WAS ONLY CUT IN WHEN FINISHED . I DO HAVE THE MIRRORS WHICH I WILL INSTALL BEFORE END OF AUCTION. IT DOES NEED THE TRIM ABOVE THE DOOR/BOTTOM OF ROOF AND A SUN ROOF SEAL. THIS CAR RUNS AND DRIVES GREAT IT WOULD BE A GREAT CRUISER OR A WEEKEND WARRIOR. IT WAS BUILT TO BE ON THE STREET AND THATS WERE IT WORKS BEST. (IT DOES NOT HAVE HEAT - A/C OR PWR STEERING) THIS IS A RUST FREE FL CAR AS CLEAN AS IVE EVER FOUND BID WITH CONFIDENCE READ MY FEEDBACK. IF YOU HAVE 0 FEEDBACK PLEASE CONTACT ME BEFORE BIDING. IF YOU HAVE ANY QUESTIONS CALL OR E-MAIL ME I WILL ANSWER ANYTHING I CAN. 239-822-2111 I WILL SELL AS-IS OR AS A ROLLER DELIVERY IS AVAILABLE CALL FOR A QUOTE THANK YOU AND HAPPY BIDDING ( got asked about the motor and heads so heres pics with valve cover removered, yes it has roller rockers guide plates and hardened push rods with arp head bolts)