Detail Info for: 1969 Chevrolet Camaro Restomod / Pro Touring 1969 Chevrolet Camaro Convertible Restomod Pro Touring LS3 L99 Resto Project Car

Transaction Info

Sold On:
10/31/2017
Price:
$ 29800.00
Condition:
Mileage:
Location:
Titusville, Florida, 32780
Seller Type:
Private Seller

Vehicle Specification

Year Make Model:
1969 Chevrolet Camaro
Submodel Body Type:
SS/RS Convertible
Engine:
LS3/L99 6.2L (only 51 miles on it!)
Transmission:
Automatic
VIN:
124679N688064
Vehicle Title:
Clear
Drive Train:
Fuel Type:
Gasoline
Standard Equipment:
Optional Equipment:

Vehicle Detail

I have too many projects on my plate, its as simple as that. I just bought a restomod 1964 Corvette Stingray convertible (almost fully completed) and I also have a restomod 1970 Shelby Mustang convertible being built currently too. So I am parting with the 3rd project which is my 1969 Camaro convertible so I can get the other two projects completed. Alot has gone into this car and when it is done it is going to be incredible looking, so I hope it goes to a good home. This car was originally a Dover White 1969 Camaro convertible with a black roof with black hockey stripe and dark blue interior (pictures attached) It was a V8 convertibleIt was built in the Norwood assembly plant The Engine and transmission came out of 2010 Camaro SS that got hit in the back end. The engine has only 51 miles on it, no that is not a typo...the engine only has 51 miles on it! The engine was tested and running stellar before I acquired it. I have a video somewhere of the engine running when I first bought it and Im trying to locate that. Unfortunately at the first garage (where this car was being put together) an employee of that garage stole the fuel injectors off the engine, the front pulley system and some parts off the Magna supercharger so that has to be noted. This car body has been pretty much been built from scratch by highly renowned car builder Brian Johnston of Screaminperformance.com Parts:1969 Camaro body with the following new parts1) Smooth Firewall installed2) Upper and lower cowl installed3) Windshield pillar complete installed4) Inner and outer rockers RH+LH installed5) Complete floor pan installed6) Convertible brace kit floor7) Trunk pan complete installed8) Frame rails RH + LH 1/8 installed9) New doors complete RH and LH10) New quarters RH and LH11) Tail pan12) Inner tail pan13) Trunk dropoffs RH and LH14) Trunk lip with spoiler15) Fenders RH and LH16) SS hood17) Lower Valance18) Header panel19) Inner Fender wells RH and LH20) Core support21) rear upper body panel22) New hinges and bolts doors23) Inner and outer tubs deep tubs (mini tubbed)24) Also comes with original doors with glass and regulators etc. has smoked glass kit More parts: 1) Stainless works LS3 Headers2) American Autowire wiring harness3) 9in Ford Housing4) Fiberglass 2011 Camaro dash5) 2011 Camaro center console6) 2011 shifter, AC Vents, Gauges, Clusters7) Aluminum radiator with fans/ black8) Convertible top body trim9) Convertible rain gutter 10) Chrome rear bumper with brackets11) Tilt steering Column black12) Art Morrison Subframe with Sway bar and transmount and also LS motor mounts13) Ride tech 4 link14) Billet hood hinges15) Billet tail lights16) Billet door vents17) New Convertible top actuators 18) New power window motors. Electric light19) AFCO 8 inch 200lb coil springs rear set20) Hyper coils 475lb Coil springs front set21) Strange 5in Double adjustable Coil over shocks set22) Competition Cam LS1 3726R/3727R HR112.0 54-000-1123) DSE RS motor kit headlights24) Engine harness and ECM and throttle pedal25) New canvas Convertible top and frame and convertible top pump/power top hose kit/cylinders 26) Fesler Door and Rear panels, hardware and armrest27) Magnacharger supercharger TVS 2300 (see note above)28) Door handles/visor supports 29) More parts are there like Marquez Billet door jam louvers and stainless door strikers etc etc etc ....too many to list Please NOTE: This car is on a rolling jig. Car cannot be removed from jig until sheetmetal is final welded for strength so rolling jig is included. All parts going along with the rolling jig will be palletized and boxed up so buyer will have to go on U uship or similiar to arrange shipping to destinationTHIS VEHICLE IS BEING SOLD AS-IS WITH NO WARRANTY WRITTEN, EXPRESSED OR IMPLIED. PAYMENT IS ACCEPTED VIA CASHIER'S CHECK OR WIRE TRANSFER. A $2000.00 NON-REFUNDABLE DEPOSIT IS DUE WITHIN 48 HOURS OF LISTING'S CLOSE AND FULL PAYMENT IS DUE WITHIN 7 DAYS OF AUCTION'S CLOSE, NO EXCEPTIONS. ONCE FULL PAYMENT IS MADE AND FUNDS HAVE CLEARED, TITLE WILL BE SENT TO THE BUYER ALONG WITH BILL OF SALE AND ANY PERTINENT DOCUMENTS OR RECORDS AVAILABLE WITH THE PURCHASE. Call Brian at 321-607-6847 if you have any questions on this car. THIS CAR IS FOR SALE LOCALLY AND WE RESERVE THE RIGHT TO END THIS EBAY LISTING AT ANY TIME. On Oct-22-17 at 14:23:11 PDT, seller added the following information: More parts and more photos at this link On Oct-22-17 at 14:25:53 PDT, seller added the following information: More parts and pictures at this link On Oct-22-17 at 14:31:56 PDT, seller added the following information: More parts and pictures at this linkĀ On Oct-23-17 at 18:43:53 PDT, seller added the following information: More parts and pictures here (ill try this again, ebay isnt letting me post the link)

Featured Items

Chevrolet: Camaro

Chevrolet: Camaro

$50,229.69

  Watches: 149
1968 Chevrolet Camaro

1968 Chevrolet Camaro

$24,300.00

  Watches: 132
1969 Chevrolet Camaro Z28

1969 Chevrolet Camaro Z28

$60,100.00

  Watches: 97