1930 Ford Model T

Coupe

8 - Cyl.

Manual

A3057260

Gasoline

Ford 1927 Coupe body chopped 5" (it is titled as a 1930 Ford 2 Door)with a 1955 Chrysler 331 Hemi.Newly done project that has to go due to I have to many projects.Motor has less than 100 miles on it and has a huge cam with alot of bump.The GMC 671 blower is a dummy blower but the gear drive makes it sound real.The engine has been rebuilt with the following new parts:camshaft with .490 lift 296 duration,adjustable pushrods,valves,bearings all standard size,rings all standard size,oil filter adapter,gear drive,electronic distributor and coil,chevy aluminum water pump and zoomies with baffles(doesn't make it much quieter).The carbs are Holley 450's that have been rebuilt but have no chokes in them so it is pretty cold blooded.The frame has been fully boxed .The rear axle is from a 1955 Pontiac with 355 gears.It has the following parts that are new:Wilwood disc brakes and hubs on front,ET spoked wheels on front,Wheel Vintiques with Ford V8 hubcaps on the rear, Mickey Thompson Sportsman tires all around,friction shocks on the front rear are Monroes,aluminum radiator w/adjustable electric fan,battery,electric fuel pump,clutch,1 wire alternator,glass in the front windshield (rear and side back windows are plexiglass with nothing in the doors) and all the wood on the body is new.The steering box is Ford F1 that has been rebuilt.Also has the following used parts: radiator shell from a 1933 Ford pickup,Model T gas tank,32 Ford steering wheel,1950 Olds taillights and a 1930 Nevada plate.The headlights and taillights all work fine.Gauges in dash do not work but the new oil and water gauges below work fine.The body is in good shape except a couple of areas on the bottom of the drivers door and the rear drivers side area on the back bottom.New rear wheel panels and patch panels on the bottom sections.The floorpan is new.Runs and stops great.Has alittle clutch hop when first starting out but needs to wear in as it is new.This is a very cool ride that has had alot of work and new parts put into it.Please ask any questions before bidding.