1941 Ford

Sedan

8 - Cyl.

Automatic

Gasoline

Read the whole thing this is a very good deal for someone building a street rod or rat rod. I pulled the frame from a 1941 ford, it was stripped sand blasted, and modified to accept a 1979 camaro sub frame. The frame got painted with rusty metal etching primer and top coated with enamel and hardner. The camaro sub frame was also completely stripped sand blasted. the sub frame got all new parts, upper and lower control arm bushings and shafts, all new ball joints, new ideler arms, new pitman arm new steering box, new springs, all new sway bar cushions and end links. New inner and outer tie rod ends and sleeves, new rotors, caliphers, pads and hardware, inner and outer wheel bearings.The rear of the frame got new shackle bushings. A new power steering box was installed. The engine started life as a 1979 302. The engine was completely disassembled , degreased , bored out 30 over. The bottom end was reassembled with a new 30 over highperformance pistons and chrome molley ring set. The crank got new std rod and main bearings. A new high volume oil pump with heavy duty drive shaft was installed. All the cam bearings and casting plugs were replaced. The block got a new street performance camshaft kit with lifters and performance timing sprockets and chain. The top end got a new valve job the hot rod shop gave the heads a mild port and polish job. The heads got the high performance valve springs. To top off the engine it got a holley contender high rise and holley carb. A set of chrome valve covers were added, a set of shorty headers were added. A new water pump and starter were installed. A new fly wheel installed. The transmission is a c-6 rebuilt with a master B&M high performance rebuild kit. The kit included a shift kit. A new 2200 RPM stall torque converter was installed. The drive shaft was built and balanced by a local drive line company. The rear axle is a 10 bolt out of a 1979 trans am. It also got pulled apart, The internals were all changed , a new auburn posi carrier was installed with new 373 DTS gears. The axles got new bearings and seals. The brakes hardware and cylinders got changed. All the brake and fuel lines were ran. The frame got a new fuel tank for the specific fit. A new holley highperformance adjustable fule pump was added. There are bare frames selling for less than my reserve. I need to make the shop space. Price some of the stuff that went into this build there is way more into it than I my reserve. All sales final, no warranty expressed or implied. I will not accept pay pal , you need cash or a verifiable bank draft, bank check. Full Payment due in 7 days. frame will not leave my hands till my bank verifies funds have cleared. I sell only to the lower 48 states, scammers please don't waste our time you must have at least 5 feedbacks or obtain permission from me prior to bidding. I forgot rear springs have a new set of traction bars installed. On Apr-22-11 at 16:50:16 PDT, seller added the following information: The engine has a set of shorty headers. On Apr-22-11 at 16:55:58 PDT, seller added the following information: A bill of sale comes with the frame, 41-48