1967 Chevrolet Chevelle

Malibu Coupe

8 - Cyl.

Manual

136177B152831

Gasoline

Chevelle has been garaged for 20 years. This was a frame of resto, the frame was painted with POR 15 which is similar to acrylic coat. The gas line, brake lines and bushings are all newer (6 years old). The floor panel on the driver side was replaced and the interior of the car body was also painted with POR 15. The car was completely disassembled and all rust removed. The body was blocked and all body lines are straight. There is one spot on the car that has a dent the size of a BB but is in a flat area easy to repair. The paint (base coat clear coat) was done in 2004 but the car does need a paint job, there is some chipped paint and discoloration. The vinyl top is 6 years old but like new. New O.E.M. chrome side mirrors, parking lights and lens, reverse lights and lens new window felt and new front and rear window. New weather stripping in trunk and between side windows. The trunk is solid. The hood is cracked and needs to be welded. I have a malibu hood to replace it but the cowl hood would have to stay behind due to the shipping restraints. DOES NOT COME WITH THE BUCKET SEATS OR BACK SEAT!! I have the cloth bench seat to sell with the car the new rear seat will come with the car. The interior is almost at 100%. New insulation and carpet, door panels, rear seat belts,door handles, armrests and pads, no ash trays. The head liner needs to be reset but is new also.Chrome over the doors needs to be replaced. The dash board is custom and I have new locks for the glove box, trunk and new knobs for the wiper, lighter, the other knobs are in great shape. The steering column is brand new flaming river (STainless Steel) with multi tilt settings. The steering wheel is a brand new grant.THe gauges are autolite and the back stop is aluminum. The stereo is in but not hooked up. New engine wire harness, The engine is a 4 bolt 350 C.I.D. It was bored over .020 and completely cleaned and rebuilt at a local machine shop. ( About $4000 into the engine and add ons.The heads are new (202 intake) nice cam and aluminum intake manifold. The engine was dyno tested with 385 hp before the rings set and 400+ hp after the rings seated. The connectors are anodized aluminum with SS braided hose. The inginiton system is a mallory billet distributor . I have the paperwork to ship with the car. The transmission is a sawgina 4 speed, the drive shaft is custom made to handle high hp. The rear end I believe is 3.73 but could be replaced to compliment the engine. The front is dropped and 14" wheels make the car ride lower in the front about 1 - 2" The exhuast must be replaced it does have a leak and is at the end of its life. Bought a new bike and dont have the room to keep both. Power Disk Brakes No Pay pal unless the percentage they charge me is added to the final cost. On Jan-24-11 at 06:40:20 PST, seller added the following information: I noted the trunk has cracks, I meant the hood. I had a few questions about the hoods available and the cowl hood will go with the car or the malibu hood if wanted. I can not send both due to the shipping restraints. On Jan-24-11 at 18:53:10 PST, seller added the following information: Power Disk Brakes and Power Steering,New fog light lens and housing New reverse light lens and housing. On Jan-27-11 at 03:21:15 PST, seller added the following information: I do resreve the right to close the auction early due to local sale listing also