1985 Chevrolet C/K Pickup 2500

Standard Cab Pickup

Vortec 5.7

Manual

1GCGK24M4FS152619

Clear

Gasoline

This is a solid Project truck. NON-running, long wheel base 3/4 ton. I've had lots of good times with this truck, but sadly the truck has sat for the last 2 years and I'm not going to have the time to complete it in 2017. I don't want to let it sit and rust. My plans were to fab a rear bed and bob the rear frame at the spring mounts. Truck has a very small amount of rust, it's a great candidate for your mud or trail toy! 4 speed manual tranny. 4 inch rough country suspension lift, 37 inch Humvee tires on 16.5 rims. 14 bolt 9.5 inch NON full floating open rear end with 3.52 gear. Front is open HD 10 bolt. 8 lug axles. Home fabricated front and rear bumpers. Front bumper is clearanced for a 12.5k winch. Windshield is new. Interior is rough. Various caliber bullet holes that seemed like a good idea at the time thanks to alcohol! Motor is out of a 99 C2500. Its a four bolt main with vortec heads. Summit carbed intake, cheap summit headers with cherry bombs bailing wired on. Granny gear first gear transmission shifts fine. It slips out of 4 wheel high, I solved that with a uber high tech bungle cord. Motor needs time set and had a knock. I do NOT know what the knock was, assume the worst. Truck also comes with the complete motor that was in the truck when I bought it. Motor needs bottom end bc previous owner had the oil and filter changed and the place used a short air filter. When I bought it I did not take the lid all the way off so basically I drove it 6,000 without an air filter. And it was my own fault! I'm pricing this at a fair price for a project truck. I will not part it out. I will not do negotiation or anything. Its a non running project truck and will need to be trailered. No reserve, I will not end early.