1932 Ford Other

Coupe

V8

Automatic

00000

Rebuilt, Rebuildable & Reconstructed

Gasoline

Ok here is a nice little project that I don't think I will have time to finish for quite a while so I thought I would thro it on here and see if any one wants it, I really hate to sell her but I have to make some room! it's a very nice 32 ford 3 window it has a glass body and it's a very good thick one and the lines are very good,it has all the metal reinforcement already installed, the frame is after market and it also in very nice condition, ( I have MSO for the body and will rite a recept for the frame and have it notorized as you see it is pretty much complete except for wiring and exuast, it has a very strong small block chevy with a B&M street blower , it has a newly rebuilt 350 turbo trans and out back there's a ford 9 inch with 370 posi, it has chrome tilt stearing column and billet dash insert with gauges , it also has a new drive shaft already installed, and it also comes with a good set of swivel bucket seats, there is also an extra MSD electronic ignition system that comes with it and a new chrome altinator, I have all the glass for it also it has power windows already installed, it has new disk breaks up front with new rotors and calipers I also have all the fenders, hood , and window garnish for it , and it also has a nice stainless gass tank already installed, so look at the pics and if you have any questions just let me know, sold as is where is ..thanks.....On May-17-16 at 18:52:28 PDT, seller added the following information: After looking at my description I thought I should tell a little more about the motor, I got it in a 55 chevy a few years back and the guy I bought it from said it was 383 stroker motor, but I disassembled it and discovered it is probley a 400,( I haven't checked any numbers on it I'm just guessing ) it has a new steel 400 crank but it has standard size flat top pistons, but everything in it looks brand new, I put new head gaskets and other gaskets in it , it also has aftermarket heads on it they are the iron heads but they do have 202 160 valves I have only herd it run for a few seconds but it sounds very powerful and it held around 70 psi oil pressure , so this is going to make a great motor for this little coupe, I hope this helps....thanks....