2005 Audi A6 Quattro

Sedan

4.2L 4163CC V8 GAS DOHC Naturally Aspirated

Automatic

WAUDL94F15N050893

Clear

GAS

Items needed: Tires 1 of the keys does not work for the keyless entry..battery? Scratches on drivers fender and front bumper Scratch on passenger door...other small scratches typical for a 2005 Front bumper has scratches and a small crack Air Bag light is on- Described below Steering wheel error light is on- Described below Fuel Pump- Described Below New: Battery Valve Cover Gasket Front brakes and rotors Serpentine Belt Serpentine Tensioner pulley Fuel Pump issue- Car intermittently takes 4-5 seconds to start. Cranks to get gas up to the engine and then starts and runs fine. I have been told that the fuel pump is good, but there is a part that connects to it to keep the fuel pressurized when the car is shut off. This part has failed and the pressure is not always held. Since this is the case when you are first starting the car it can take a few extra seconds to build the pressure to get the gas to the engine. Air Bag Light- Air bag light is on due to middle rear seat belt sensor. Error code said that the sensor is measuring high. I can clear the code and it will come back on after use of the rear middle seat belt. Steering Wheel Light- Error light is on indicating that the key is not mating with the controller. When this error is on I experience no issues (other than the light is being on). The keyless start push button works flawless. I have been driving with this issue for 6 months. From what I can find when this error occurs it causes the steering wheel to lock and you can not get the key out. In my case the steering wheel does not lock and the car runs fine. I have taken it to a mechanic and they have confirmed that besides the light being on they really do not see an issue. If you clear the error the key may not be recognized at first try. Walking away from the car and coming back to it the error light will be on and the car starts again with no issues. If you have any questions please ask.