1993 Nissan 240SX

None

JN1MS34P2PW302890

Clear

Description: The car is race ready after you throw a motor in it, currently ready for any swap of your choice. AGAIN THERE IS NO MOTOR IN THE CAR THE VH45DE THAT WAS IN THE CAR HAS BEEN REMOVED. INSTALL WHATEVER MOTOR YOU WANT IN THE CAR AND TAKE HER TO THE TRACK! READY FOR ANYTHING SR20, 1JZ, LS1 1993 Nissan 240sx Coupe Outside: Silvia Front end B-Magic wide body fenders -25mm Fronts 50mm Rear Instant Gentlemen Kit Dodge Charger Purple Paint Tubbed Fender Wells Wheels: Cobra R replicas 17x10.5 +20 (all 4) Sumitomo 235/40/17 25mm spacers in the front50mm spacers in the rear Suspension: Megan Racing Coilovers Full ISIS arm kit (Toe, RUCA, etc.) Tien S14 Inner tie rods SPL Outer tie rods SAGE Auto Super Angle Knuckles Interior: RESPECGARAGE Full 6pt Cage MOMO Super Cup XL SeatCustom seat bracket, mounted direct to the floor. As long as you arent short the positioning is perfect for the steering wheel location. Power By Max Inline Hydraulic CORBEAU 5pt Racing Harness NRG Quick Release NRG Deep Dish Wheel SAFC-1 Cyberdyne Water Gauge Cyberdyne Oil Pressure Gauge Also a no name analog oil pressure gauge Full Painless Wiring Interior Body Harness Done by Ramey Built Custom Switch Panel for Ignition Key, Start, Fuel Pump, Lights, Fan Engine Stuff that will come with it: Walbro 255lph Pump(Installed) Godspeed Radiator Godspeed Dual Slim Fans Straight Pipe exhaust (would need to be modified for your swap) Steel braided clutch line(Installed) Sentra brake booster(smaller than stock for V8 swap)(Installed) Thats All I can think of at the moment, there might be some other stuff. This is not a show car, it is a purpose build drift car that just happens to be sexy as hell. There are two cracks in the aero, one on the passenger fender from being so low trying to get in my drive way. The other is the rear bumper, it flew off on a run and cracked, I have zip tie stitched both. All stickers will be removed from the car before pick up. Ive notice some of the pictures keep going in and out, here are links for them at my photobucket... http://img.photobucket.com/albums/v358/wytr1ce/purple/6532157333_23f709dbeb_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532157749_bd008f411f_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532158509_1319b5155c_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532159703_8ba161daed_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532160149_ba280925ae_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532160649_f91ffcfb46_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532160929_b67f3a425a_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532161557_9ec0f3f692_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532168263_55cc4a7fd3_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532168765_61f6d11b43_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532169391_3e2a4f876c_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532169741_7321dea9f0_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532170143_9f18916bd3_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532170381_056d9128ea_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532170635_3dfbe044f2_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532170969_d3117e4683_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532171567_9fc98e5101_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532172017_dd1b2082c8_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532172307_ec09c01462_o.pnghttp://img.photobucket.com/albums/v358/wytr1ce/purple/6532172599_da9d64abb9_o.png On Oct-12-12 at 12:53:25 PDT, seller added the following information: I want to add that the front radiator support is cut off at the time. I did this so that I could remove the old motor easier and I was going to make a custom tube support instead. Buyer can let me know whether they would rather leave it like that or I can weld it back in place.