1997 Chevrolet S-10

Pickup truck

2.2L 4 Cylinder Gasoline Fuel

Unspecified

1GCCS1443VK191256

Clear

Rear Wheel Drive

Gasoline

What I have for sale is my 1997 Chevy S10. The truck is cruently not put together I have almost all of the parts except a radiator and a engine tune for the comeputer. I have a 5.3L engine that came out of a 2001 Chevy silverado with only 49K miles on it and I have the recepit for the engine from when I bought it. I have the computer wireing harness and brain. I also have put a new regrind z06 cam in the engine that is why the timeing cover is not on the engine in the photo, and I have all of the front accessorys. Like the power stering pump, a/c compressor, alternator, water pump. I also have new mounts for the frame becasue the truck was a 4cly and I have new conversion engine mounts that bolt to the block that are adjustable to position the motor in the truck. I also have the new headers with bolts and collectors for the truck. I have a 27 spline 700r4 that needs to be rebuilt for the truck and I have a brand new set of beehive valve springs for the engine that are still in the plastic as well. The truck is in good shape I have pulled the front radiator suport and I no longer have the 4cly/5 speed combo that was in the truck because it had a blown head gasket. The truck has new tires on it, that only have about 300 miles on them the truck has just been siting for about a year. I have not had time to do anything to the truck and am just tired of looking at it go to waste. The truck is lowered with bell tech suspension drop from what I was told when I got it 3 years ago and the front end had been rebuilt around that time ie new bushings and tie rod ends and what not, and when I was driveing it around it had a good ride and tight front end. It also has drop shocks, roll pan, cowl induction hood, and a vel side front bumper cover all painted to match but the clear is fadeing on the hood and roof of the truck. Also the truck has had a blazer front clip put on it so it does not have the ugly sealed beam head lights it has seperate high/lows on the truck with a diffrent grill assembly, I have pictures of the truck before I took it apart and when it had smaller tires on it. The rear tires are big and would give good traction if you can get any with the v8 engine in it, they are a 255/50r17. The rims on the truck are 17in Eagle alloys and they just need to be polished, there is a dent in the driver side of the bed where it got hit after it had a piant job done on it about 4 years ago, I have a pic of the dent. And the blinker/hazard switch is broken where the hazard part came out, which you can get one on here pretty cheap. The truck just needs the engine put in the trans built and a computer tune or you can put the factory cam back in and just put a trans behind it and drop it in and drive. If you have any questions you can call me on my cell or text me, I do work at night so please call after 3:00 P.m. central time. Thank You for looking and good luck. Eddie 940-781-8337