2001 Lexus IS

300 Sedan

6 Cylinder 3.0 Liter

Automatic

Gasoline

Air Conditioning

I really don’t want to sell this car due to I have yet to boost it and finish it. This car has been my project and have put a lot of time and money into this IS300. It started off fully stock and I just added my personal touch. I am selling due to I am in Iraq contracting have now been here for 2 years. I go home and drive the car but feel it should go to someone else now.. The car runs good and was serviced at 110,000 with new seals, VVT-i cam gear- water pump, water pump seal, engine seal, radiator, cam gear seal tuned, and i do have the receipt for this. On 8/22/2010 the car was taken to Toy House in Florida (specialize in Lexus and Toyota) fully serviced and checked for anything that is or would be a problem. Car has nothing wrong with it. Front lip has minor rock chips but car has been cleaned and detailed to the fullest. It has also been vacuumed and waxed awaiting a buyer as of 2010/8/25 The car was originally MSM stock. Car was painted a custom blue for about a year 1 show season accompanied with Carbon Fiber parts. After that show season I changed the car to the current set up. The interior was wrapped in a black suede material. the roof, Pillars were all done. The visors were removed for this and never reinstalled for a cleaner look. The car recieved a full repaint including door jams, under the hood and trunk were painted professionally also. Now the color is Lamborghini Murcielago Balloon white mixed with Lexus Glacier Mica Frost pearl. A lot of the white pearls now though look off white or the eggshell white appearance. The is350 white is a silver/white with the pearl and the lambo is a white/gold with the pearl, i mixed it around a little to my liking and here is the result. Car has won many shows, HIN Nightshift in Austin, Houston’s Import face off, HIN, Local events and featured in some pic's on Hellaflush.com from the simply clean event in Orlando 2010.. I also have a VIS authentic Carbon hood with gas struts, A complete extra stock oem bumper with Molded Wald lip needs a lot of TLC though, Top speed headers, and a No Name brand strut bar and OEM crossed and drilled rotors new and uninstalled that I will include with the car. I will include touch up paint with paint code for buyer as to touch up anything that may happen later. NOTE: Front lower mesh is now black not white and front lip on car is not molded due to daily use. A new OEM bumper was purchased and painted, a lip was also purchased, painted and installed. you can see in the pictures with the car in the driveway. A list of current mods: Interior -blue foot well lights -Altezza white led gauge cluster -black suede roof and pillars -hard wired radar system -Remote power for stereo (NO KEY) -JDM pop up dash Exterior -2007 Lamborghini Balloon white with Glacier Mica Frost pearl -Shaved side moldings (not the handles, just the side moldings) -ABS Dynamics Wald front lip NOT MOLDED -Wald side skirts MOLDED -Wald rear lip MOLDED -Altezza Dark Chrome headlamps -Altezza Dark Chrome tail lamps -AAC custom halo's 10000k -Custom mounted Junction Produce fin antenna -10000k H.I.D.fog upgrade also have 3000k Bulbs for the yellow look -10000k H.I.D. upgrade -Fog mod upgrade, sun roof upgrade Sound & Video -Jensen touch screen 7" tft, nav/dvd/cd/mp3/sd card (cd reader reads only 70% of time, use SD card for music/ videos) -Pioneer Premiere full component set up front -Pioneer Premiere rear deck speakers -MA Audio 1200w 4chan. Hi's Mid's -MA Audio 3000w mono amp -12" Alpine x 1243d sub 1000w-3000w -custom box with floating amps -Plexiglass see through wall Engine -K&N FIPK intake gen. 3 -HKS Hi-Power with titanium tip -LMS Heat shield -TEK grounding kit -DRL removal suspension -Tokico HP Blue Shocks/ Struts -Skunk 2 Full Coil-over sleeve system -Front strut bar (not installed) -Crossed drilled and slotted rotors -Stop-Tech pads -19x8 1.75" lip Tork -19x9.5 3" lip Tork -Faulken 215/25/19 front -Faulken 235/35/19 rear EXTRAS will be on buyer to have then shipped with the car. -VIS Carbon fiber hood (for shows) -OEM cross drilled and slotted rotor set new with pads -TOP SPEED headers (used and colorized already) -No name front strut bar -FIGS carbon hood kit I am aware of the stock price for the IS300. for my year and mileage 6K-8K is a fair price. to duplicate these mods even if you buy a stock IS300 for 6k, you will not have the same set up for less than 13k not including cost of car and body work and prep. I have been in the car scene for a long time and understand quality of work into after market parts and this car was not spared in any. car runs good and has no problems at all minus the cd player issue. I believe it is the lens reader itself but with a 4GB SD card you can play all the music and videos needed. I will assist with pick up of vehicle. if being towed, trailer, or through vehicle shipment, car will be picked up at my house. Front bumper may need to be removed upon hook up to shipping vehicle and that will also be assisted. car is clean and title is in hand Wining bidder will deposit $1000 and also the $500 for paypal within 24 hours of winning. That is $1500 total within 24 hours of winning. Full payment will be received no later than 7 days after auction ends. I WILL NOT TOLERATE NON PAYING BIDDERS AND WILL USE EBAY AND PAYPAL TO THE FULLEST FOR NON PAYING MEMBERS Vehicle is for sale locally also and I reserve the right to cancel auction and stop accepting bids if vehicle is sold locally. On Sep-07-10 at 13:12:04 PDT, seller added the following information: I have added 2 pictures of the previous set up for reference. The car was full custom blue (note windshield decal matches current pics and carbon hood pic: This is my car in all pics)Also a pic of the car with the carbon hood. It is a stock VIS hood with tight carbon 2x2 weave. All extra parts will be placed in car during transport. The only piece that will not fit in car would be the carbon fiber hood. Upon winning the auction I will work something out with the buyer and arrange shipping for the hood.