1984 Chevrolet C-10

-

Unspecified

2GCDC14D8E1186555

Clear

Gasoline

Up for aution is a 1984 Chevy C10 Scottsdale rolling chassis. I am selling the truck as a rolling chassis with a SBC 305 that has been taken apart. The truck has some rust on it. There is rust in the wheel wells, on the tailgate and the cab corners. The frame of the truck is in good shape. I just put a drop kit on the truck. The rear end is dropped 5" using drop brackets and the front is dropped with drop spindle with new lower ball joint. I spaced the front tires out and put new studs on the front tires. The tires are old and cracked but hold air and the rims are in good shape. Only the front windshield has a crack and all the other windows are not cracked or chipped. There are spots on the floor that are rusted through, but the floor under the seat and behind the seat are in good shape and have no rust. The wiring in the cab of the truck has been recently replaced. The 305 was running before I took it out. There are no cracks on the block, heads, or crank. The engine looks to have been taken apart before but it still has stock bore size. The bearings look to have been replaed not too long ago. The valve heads are 882. The engine comes as a long block. Also comes with the auctions are; an extra oil pan, exhaust maifold, rods that have been machines (came out of an SBC 400), and an extra set of 624 valve heads. I also have replacement cab corners and a better looking dash. Also, the truck doesn't come with a transmission or seat. NOTE: The pictures of the truck are pictures with another engine in it that does not come with it. The engine will be taken out before the end of the auctions so the front of the truck will be higher up with no weight in the front.