1984 Chevrolet C-10

-

8 - Cyl.

Unspecified

2GCDC14D8E1186555

Gasoline

Up for auction is a 1984 Chevy C10 Scottsdale rolling chassis. I am selling the truck as a rolling chassis with a SBC 305 that has been taken apart. The truck has some rust on it. There is rust in the wheel wells, on the tailgate, and the cab corners. The frame of the truck is in good shape. I just put on a drop kit on the truck. The rear end is dropped 5’’ using drop brackets and the front is dropped with drop spindle with new lower ball joint. I space the front tires out and put new studs on the front tires. The tires are old and cracked but hold air and the rims are in good shape. Only the front windshield has a crack and all the other windows are not cracked or chipped. There spots on the floor that it is rusted through but the floor under the seat and behind the seat are in good shape and have no rust. The wiring in the cab of the truck has been recently been replaced. The 305 was running before I took it out. There are no cracks on the block, heads, or crank. The engine looks to have been taken apart before but it still has stock bore size. The bearings look to have been replaced not too long ago. The valve heads are 882. The engine comes as a long block. Also comes with the auction are; an extra oil pan, exhaust manifold, rods that have been machined (came out of a SBC 400), and an extra set of 624 valve heads (624). I also have replacement cab corners and a better looking dash. Also the truck doesn't come with a transmission. NOTE: The pictures of the truck are picture with another engine in it that does not come with it; the engine will be taken out before the end of the auction so the front of the truck will be higher up with no weight in the front.