1971 Honda CB

Clear

This is a fully restored 1971 Honda CB750, completely disassembled and restored piece by piece All bolts, brake rods, springs ect were glass bead blasted and then zinc plated professionally with the very light blue shade. All chrome parts are either new or have been re-plated chrome. Frame and frame components such as the kickstands, battery box, engine mounting plated swing arm - etc. were Powder coated in gloss black gauges have new face plated and were lubricated , handle bar switches rebuilt and painted. front brakes - master cylinder rebuilt, caliper rebuilt and new pads. rear brake shoes are in excellent condition. new spokes, rims and tires and tubes front forks - new seals New Reproduction HM 300 Exhaust Engine was disassembled, then glass bead blasted and repainted correct cloud silver with PPG acrylic enamel, new rings, seals and of course gaskets during reassembly all dimensions were checked for wear, all were found to be within tolerances Carburetors were ultra sonic cleaned and rebuilt with new gaskets -o-rings etc.. then synchronized Fuel tank was sand blasted to bare metal and then painted with the correct Candy Gold with the first stage silver metallic, and then the gold Candy, followed by several coats of Clear. Paint was allowed to cure for 30 days then sanded with 600 grit and decals applied, after 7 more days the decals were buried in several more coats of clear, then color sanded - cut - buffed and polished. nice new seat cover and painted pan, new turn signals, new peg rubber, new emblems, lots of new parts. some reproduction and lots of OEM Honda. Everything works on the bike, starts, runs, rides, shifts all just like it should, just like it did 40 something years ago. and with the 300 exhaust it sounds absolutely nasty this is a stunning example of a cb750 and you will not be disappointed. normally photos make a bike look better than it actually is - that is not the case with this bike the photos do not do it justice - looks better in person and up close - this is not a 20 foot bike I invite you to look as close as you want to I have ridden the bike 72 miles since it I completed the restoration, as noted on the Odometer I do not know what the original milage was Bike is from Alabama so a Bill of Sale is all that is required or available I will provide a notarized bill of sale Give me a call should you have any question Ronnie Jennings 334-654-2610 On Apr-27-15 at 03:07:42 PDT, seller added the following information: Alabama does not issue titles on vehicles 35 model years old or older, go to Alabama department of revenue to perform your own research states that do issue titles will accept a notarized bill of sale, and then issue title as they will research Alabama's law. Engine VIN# CB750E-1095466 On Apr-28-15 at 15:07:10 PDT, seller added the following information: I now have a Clear Tennessee Title in my name