1987 Suzuki Samurai

mazda 12a rotary

JS4JC51V0H4128145

Clear

I'm selling my 1987 suzuki samurai. This was my project for a couple years. It was stripped down for a frame off re-build. I installed a Rocky Road coil spring kit that i modified slighty with longer springs to give more lift. It also has a 2" body lift. The frame and components were coated with herculiner. I then installed a rebuilt mazda 12a rotary motor and 5spd transmission. It has a Racing Beat header and intake and a Holley off-road 470 cfm carb. The distibutor is new and has a MSD 6 off-road box and high vibration coils. It has 3" stainless exhaust with cat and Racing Beat pre-silencer and muffler. The transfer case is new from Trail gear with 6:5 to 1 crawler gears, heavy duty input shaft and twisted t shifter mod. The front rear was rebuilt and locker installed with 5.38 gears,Spidertrax 26 spline axles and Warn locking hubs. The back rear is a dana 41 with welded gears and 5.38 gears.(I also have the matchining Dana 25 front rear with matching 5.38 gears that will be included.) It has disc brakes on all corners. The front and rear driveshafts were made by Tom Woods. It has a Toyota power steering box and Trail gear pump with cooler. It has a Davesport rollcage. I also made heavy duty bumpers with tow points and installed them. It has a 20 gallon fuel cell and rolls on 16/35-15 Super Swamper Boggers and nice aluminum wheels. I'm sure there is more I'm forgetting. It has been a very strong,reliable truck! It is not a daily driver but can be driven on the street to get to the woods. I'm selling so i can start my next project. My loss your gain.