1930 Ford Model A

Coupe

8 - Cyl.

Automatic

0000000

Other

Gasoline

Here is my 1930 model A coupe it was an early 60's hotrod from Ga. It has been chopped 4 inchs and channeled 2 with 1" square tubing as a subframe. This car just needs the body work finished, painted your color and final assembly. It is on model a rails fully boxed!! with a custom push bar made of stainless steel. It has a rebuilt chevy 350 small block with a comp cam 3 angle valve job, chrome water pump, edelbrock aire-gap intake, new mallory distributor, new starter, it has never been fired, limefire headers hpc coated. The radiator is original tanks with a new core set up for pressurized system. It is backed up to a New speedway motors chevy 350 trans with a 2800rpm stall and a gennie swan shifter custom drive shaft with pete and jakes ladder bar suspension rear with coil over kit included. Front suspension is s super bell dropped i-beam that is 4" drop drilled and painted with a posie superslide spring with all stainless hardware including hairpins. This has the 45 fin buick brakes.....and this was not the old ford brakes with buick drums those are buick backing plates machined to fit ford spindles with 48 ford hubs fitted to buick drums and all new buick shoes....alot of stopping power. Rear brakes are a ford 9 inch with a posi think that was a 3:31 to 1. and new brakes. Included is a new flaming river column with tilt as well as a vega cross steer box and all new master cylinder with all brake line hardware. The body has had a four inch chop, all the moulding are done and all the wood for the interior replaced, there is all new glass and a chrome windshield. The interior is custom made and has not been installed red with black tuck and roll inserts. The front doors have been reskinned and painted PPG dar 9000 black...some say this is deep dark black. The cowl panels are new and grafted into the body and will need to be finished body work done, the tank top is new and smooth and comes with a 32 ford dash. the quarters, wheel wells and rear section are all new and will need finish body work. The entire car was sandblasted and put in epoxy so what you see is what it is. the filler on top in the pictures should be removed and redone before painted, it is just ruffed in. This thing is 85% done all the hard work and money has been spent, i just have too many projects and don't want this to sit, ask any questions and i will answer! im sure i'm forgetting something but the car has alot of potential and will make a great ride!! Sold as is Where is with a bill of sale all sales final, the car is for sale locally and i do reserve the right to pull this auction if sold, i do not want any trades as i am reducing the projects. Start adding the items up that are new and all the hard work thats been done you couldnt do it as cheap as im selling it.