1973 Jeep CJ

258

Manual

Clear

Gasoline

You are bidding on a 73 Jeep CJ5. We pulled it behind our camper on all our camping trips with a tow bar and taillight harness that I fabricated (tow bar and 7 pin harness go with the Jeep). Engine is a 258-6 cyl it has a 4 barrel carb, split Headman header with dual exhaust. 3 speed manual trans on the floor. I converted it to power steering, near new seats and bikini top. I built a rear seat and had it professionally upholstered and installed rear shoulder harness seatbelts in the rear. I replaced rear floor and mid side panels with 14 gage deck plate, replaced all body mounts and fabricated the rear tub corners before I painted it with single stage Eastwood paint. I built a rear bumper with swing out full size 31" new spare. I also replaced the hood, windshield frame and front bumper. This is a sound, cool, good looking and very usable CJ5On Dec-14-17 at 16:35:46 PST, seller added the following information: I'm not selling a perfect show Jeep so please ask questions or if you need certain pictures. On Dec-15-17 at 13:51:52 PST, seller added the following information: Added some under the body pics from on my hoist.On Dec-15-17 at 13:57:33 PST, seller added the following information: Please look at the picture with the patch welded on the frame. Don't be alarmed its not a problem. When I got it, a patch was already there. So I removed the patch and saw it cracked at a bolt hole where the Z bar bolts up and they never welded the crack. I welded the crack them welded a much nicer piece of 1/4" flat bar on it. Everything then was straight and great.