1969 Triumph Bonneville

Clear

This is a great Triumph Bonneville 1969 project for sale, the project is a matching numbers frame and motor with title, the project is very complete, all the sheet metal is in great shape, fenders are solid just need repaint, as well as the oil tank, tool box, and chain guard, the gas tank also needs paint, think there is one badge screw hole that has one of the screws broken off in it, and someone had coasted the inside of the tank, not sure why as the bottom of the tank is solid, no rust on the outside, the stays for the rear fender and front fender are solid,, there are a few doubles of parts that are being included, such as rear hubs, fork front ends and lower legs, one set of tubes in the front end are over sized so the lower legs are of more use, correct set of gauges, unknow if in working order, one top clamp has a welded gauge bracket on it, that is no good but included is another bracket for the gauges, also the p clamps are in the top clamp that has the welded on bracket, another p clamp is included, the motor turns over fine and is complete, I did take the head off to see what bore the cylinder and or pistons, the bore is 40 over, verly tight and cylinder liner seems to be clean, , but included is another set of cylinders that are at a 20 over bore, head looks good, there are no broken fins on the cylinders or head, motor is complete with head boltsand washers, there is a new headlamp ring from domi racer, lever new after market, I do have a nice set of handle bars included but not in the photo, the seat has no tears on it solid seat pan good foam, but the seat strip around the bottom of the seat is not all there, so that would need to be replaced, has the bolts for the seat hinges and seat hinges are included, also included are new speedo cables and brake cables think there is a used one in there as well, other bonus part is a brand new , new laced spokes new rim from waldridge motors, the hub had been painted black, well done, and a new avon tire and tube , I would use the brake plate and internals including the front axle to make the new wheel complete, so I would but new bearing and brake pads even though I included 2 sets of brake pads for the rear wheel, as seen in the pictures two rear hubs and drums one chrome brake plate , the header pipes are very clean one is nos, the other has a few little scratches, the exhausts are both used, but just a little surface rust, very usable with brackets to mount them, so the only things not included are a complete wiring harness, some of the small electric parts are there, but not the harness, I do not have the correct bolts to mount the motor to the frame so those are not a hard find on ebay... I would buy a new rim/spokes and tube and tire for rear wheel, so only the 2 rear hubs are usuable, I didn't inclue carburators because the would need to be rebuilt,, but if you want a set I'm sure I have a pair of complete one here and you are more than welcome to them, the frame is solid the rear section needs one of the small tabs to be re welded back on for the oil tank to mount on to it, or the battery tray to fit over as well, and I don't have the correct battery holder, thought I had this project sold at one point but person ran into a money crunch, I get it it happens, so now it is up for sale, if I can help in anyway to box parts for a shipper no problem will do that, could deliver to Wauseon, ohio in july or even to Barber in October, always welcome for a local pick up, as I said I will box it up for a shipper, just give me a few days to get the parts boxed up.........just trying to give all the info I have on the project, if you have any questions please ask, or if you need some pictures of something else, let me know and ill send them on to you , no ship to outside of the USA unless you have someone coming to pick the project up, thanks