1969 Chevrolet Camaro

Hardtop

3970010 Not Original

Manual

124379L525907

Clear

Gasoline

1969 Chevy Camaro Z28 R410 Van Nuys (Los Angeles) California (from mid-December 1968 on) Factory Muncie 4-Speed 3925660 Aluminum Intake 391760 Original engine was removed and destroyed in a race car a few years ago, the original Z28 intake, bellhousing, flywheel, bolts, and pretty much everything else that bolted to it, comes with the car, including the headers and exhaust, we also have a 3070010 engine that you can have witht he car if you want it, it has been sitting for many years in a Barn and will need a complete rebuild. As you can see, the car has a dent in both doors due to negligence during storage, the body however overall is solid and the undercarriage looks to be solid also, it appears to have a "patch" on the drivers floorboard, the stub has been tied to the rear, the interior is in pretty good shape which leads me to think that the mileage could be accurate, it's definately going to need some new carpet, or at least a good dye job, the rear tires in the picture do not (do not) go with the car, the other wheels pictured do and we'll get some "roller" tires installed on them for transport. Any questions or insight, please don't hesitate to contact me through ebay's "ask a question" Check out my other items! More Pictures https://sellinbuy.shutterfly.com/5399 On Dec-21-14 at 15:21:20 PST, seller added the following information: It has been pointed out to me, that the car has a 10 Bolt rear and appears to have drum Brakes on the front. Please do your research before bidding. Thank you. On Dec-26-14 at 16:26:59 PST, seller added the following information: I mounted tires on the wheels today and put them on the car, so now it's ready to roll. I also dug the engine out of the barn and brought it up to the shop to clean it up, I put it on the engine stand and tried to turn it over, but it was good and stuck, so I pulled the heads and found that before it was put in the barn (10-15 years ago) it must have got some water in it, because three of the cylinders are very rusted and will definitely need to be bored, if you need a core to rebuild with the car, we do have another small block that may or may not be good, it's a 283 or 327. I also posted a few more pictures with the others. Thanks. Bob.