2000 Dodge Dakota

Standard Cab Pickup

5.9L 360Cu. In. V8 GAS OHV Naturally Aspirated

Automatic

1b7gl26z6ys645274

Clear

GAS

2000 Dodge RT Dakota with 410 cubic inch with forage 4.00 crank. Eagle H-beam rods rates for 1500 hp. Diamond foraged pistons with full floating machine tool wrist pins with total seal rings. 8:1 compression ratio. Block has been oil ringed, uses a copper head gasget. B1heads with one piece stainless steel valves with triple springs and 10,000 RPM rocker arms. Comp cam 800. Lift solid roller cam. Manifold is a modified M1 and flows 345 plus CFM. Throttle body is a 105 Mm Wilson Manifold and elbow. Has two stages of water and methenol injection and has a separate 5 gallon fuel cell. Transmission is a custom 518 with overdrive and lockup converter. The converter is a Hughes Performance billet converter with lockup and stalls up to 5500 RPM. Ignition is a fast XFI 2.0 with 160 lb/hr injectors with an aeromotive pro series eliminator fuel pump with a -12 fuel line from fuel cell to engine and a -10 return line. An aeromotive EFI regulator with boost reference. Has a pro charger F1R running at 70K and makes over 20PSI with full cog belt set up. It has power steering, door locks and power windows. It also has keyless entry. It has an S&W back half and 10 point cage. Rear tires are Mickey Thompson street tires, 31x18x15 and you can put larger tires than that if you want. Rear end is an 8.3/4 with 4.56 gears with aluminum spool and 35 spline axles with 4 piston willwood disc brakes. I have 65K + in parts. IS COMPLETELY STREET LEGLE. Runs on E85 or 91 octane. For more information contact Chris at 408 -605-4324