2004 Chevrolet Corvette

Z06 Coupe

5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated

Manual

1G1YY12S745120184

Salvage

GAS

2004 Chevrolet Corvette Z06 w/HUD Here is a link to the youtube video of the dyno tune done by House of Boost: http://www.youtube.com/watch?v=GDlx_o0xUsI&hd=1 Here is the link to House of Boost website: http://www.houseofboost.com/store/ Here are 2 links to my YouTube page I just added video of the car running after we got it trailered back to my warehouse: http://www.youtube.com/watch?v=dvGa2W4j68Q , http://www.youtube.com/watch?v=q4dEJJ6gRHA The Good: I purchased this car stock and took to House of Boost for all modifications (approximately $18,000 on mods alone). It is tuned at 636 HP to the wheels and 550 Lbs TQ @ 3,000 RPM. That equates to over 750 HP on a very mild tune of 6.5lbs of boost. 0-60MPH IN 3.5 SECONDS. Car has never been to the track but I estimate it would run low 10 second 1/4 mile. The Bad: The car does have a salvage title. It was a clean title when I purchased it in 2010 but in late 2011 I hydroplaned in a rain storm driving down the highway. The car slid off the road into high grass. I convinced the insurance company to total the car but there is very little damage to it as you can see in the pictures. THIS IS A RUNNING, DRIVING CAR. SINCE REPLACING A BROKEN LEFT REAR WHEEL, I HAVE HAD IT WELL OVER 100 MPH. This car can be fixed for less than $2500 or you could pull the power plant and drop in a hot rod for one awesome beast. Powertrain only has 35,000 miles and supercharger and cam have been in less than 10k.That being said, I will describe any damages that I know are present.Needs front bumper cover and left side running light/blinker.Needs radiator cradle replaced. I have a brand new one from ProCharger that will be included. *Installs easy, only 4 bolts.Left rear wheel has been replaced but will need alignment. I took to get aligned but car is lowered on stock bolts and with the front bumper cover hanging they could not get their laser on their front alignment heads to read. Exhaust tips are bent from sliding thru the mud/grass. The exhaust is expensive Billy Boat w/remote loud/silent feature. I think a muffler shop could bend back but I also have stock Z06 mufflers and tips I could throw in for $400.Rocker panels are scratched on underside but cannot be seen unless you lay flat on the ground.Right fender came loose at bottom bolt while sliding in high grass. Can be reattached with a larger washer.Rear tires are bald, thus the reason I hydroplaned and slid the car off the road. Picture #1 and 19-23 show the car before the accident. The other pictures show the area where it slid off the road and the others show it in my warehouse where it has sat since the accident. I have $45,000 invested in this car & you could own it for less than the upgrades I have done to it. I am buying a Ferrari so I am not interested in trades.Procharger P1SC-1 Stage II Intercooled Tuner Kit $5930.00House of Boost Forced Induction Camshaft Package $ 935.00Kooks Stainless Steel Long Tube Headers w/X-Pipe $1700.00Billy Boat Fusion Bi-Mode Catback Exhaust System $1875.00ARP Connecting Rod Bolts $ 80.0060lb/hr Fuel Injectors $ 480.00Kenne Bell Boost a Pump $ 280.00Labor & Tuning $3,000.00 If you are a serious buyer, feel free to call me. Leave a voicemail w/detailed info and I will call you back. 918-8zero9-nine7nine7 I will help with shipping arrangements at your expense. If you are not local and want to send a mechanic or representative to inspect or ride in the car, I will be happy to meet with them. I will even consider delivering for the right price. I also have a custom car hauler trailer I had built for the car that I will sell for $6500. Tag lines: supercharger, pro charger, ATI, HUD, turbocharger, turbocharged, cam, camshaft, 1000 hp, intercooler, Camaro, Shelby, resto, restomod, streetrod, hotrod,