1959 Triumph Bonneville

well here it is i have this great restorations dream, well a bit of work or make it the coolest bobber in town, anyway, ,it was last registered on 1968, for the bad stuff the bonneville is missing mufflers, seat,..has 389 88 commando slash cut carbs instead of the 376 204 amal slash cut carbs dont have them, bracket that holds the remote float, missing rear loop stay for rear fender, yes the fenders are bobbed, but are really solid, think i have the tank badges but didnt look, needs tank trim, didnt show rear tail lamp.. i have this with a rear light, rubbers for pegs shifters, parcel rack i also have but i didnt make it into the pictures it takes the 5 bar, would like to get the long smooth fork covers that are on the bike to stay here, but not a deal breaker, this is loosly assembled, so some hardware will need to be obtained, motor mounts hardware, and motor bolts are all there, no center stand, wrong handle bars, no horn, side stand is ok but not the best.,the top end needs a little attention on the cylinder head combustion chamber had a little damage around the lip ofthe combustion chamber, only on one side, needs new pistons- pistons that are with it are 20 over so still some life in the cylinders....cylinders had a fin fixed,but once the headison the cylinders you will not seethe fix.. think the nacelle legs are from a 51 model , as you can see in the pictures the MCM smooth covers were put on for the bobber state that its in, the speedo revolator is correct, motor matches the frame, the cases are matched, the trans is correct for that year, correct wheels, undamaged frame, all tabs are there, magneto is also dated as 59 K2FC so agreat project for a rare Triumph, motor spins but i would go through this for a total restoration to make it right but please look at all the pictures of the project, i do not have a title for the bike, so bill of sale only from me, if the buyer is out of the country, i will assist on boxing up parts, but they will be responsible for pick up, so if you have someone here in the states that after the payment is received for project and ship, i will send it to them, but i wont ship out of the country, the frame will be a problem due to its size, so if you have some ideas please contact me so we can arrange some type of ship for the rest ofthe world buyers, if in the States i will ship the frame by UPS seems to be the easiest way, then box all the other parts and send them on their way, also i will deliver the bike from Cincinnati Ohio to a 5 hour distance from my home for some help on gas, and as always a local pick up always welcome......please ask questions, someone will be happy with this 59 bonnieville, selling to pay for some other project completions....also looking for a Munch Mammoth front wheel with brake will reduce the price if you can include this in payment, or if anyone has one of these wheels they want to sell please let me know, thanks again