Detail Info for: Ford : Model A 1930 Ford Model A Sedan Rat Rod

Transaction Info
Sold On:
03/06/2011
Price:
$ 7100.00
Condition:
Used
Mileage:
Location:
Canyon, Texas, 79015
Seller Type:
Private seller
Vehicle Specification
Year Make Model:
1930 Ford Model A
Submodel Body Type:
Sedan
Engine:
8 - Cyl.
Transmission:
Automatic
VIN:
Vehicle Title:
Drive Train:
Fuel Type:
Gasoline
Standard Equipment:
Optional Equipment:
Vehicle Detail
Up for sale is my 1930 ford model a sedan. 2x3 custom frame that is Z'ed 3in in the front and 14in in the back, 10 bolt rearend out of a 80s camaro with 4 link and coil overs. Front end is all new from speedway with drop axle, new chevy spindles with disks, and new spring and radius rods. 350 crate motor with aprox 35,000 miles, 350 trans lokar shifter. new radiator from speedway. steering box and brakes all mounted under dash but need to be finished, sheet metal interior. body was rough when i got it, new roof patches that still need to be blended. 6in chop, channeled 3in over frame. Body body is a 30 tudor sedan the body was pretty rough when i got it. new patches above each door and i had to make a patch for above the rear window on the passenger side rear window. roof has a rambler hood as a roof filler. it has been welded and minor bondow work on the passenger side but still needs to be finish welded on the drivers side. the floors are welded in except for right behind the rear window and some small spots on the fire wall. chopped 6in and channeled 3in over the frame FRAME the frame is made out of 2X3 11 gauge box tubing. Z'ed 3 inches in the front and 14 inches in the back and a trans crossmember welded in the middle. the frame has not been finished welded (i was planning on mocking up the entire car then tearing it back apart and welding everything and paint) DRIVE TRAIN Motor is a 350 crate motor that i bought from a friend with aprox 35,000 miles on it, it has stamped made in mexico on the block so it is one of the high nicke content blocks. motor is stock but has been painted red with a dress up kit, and lake style headers. The polished intake and carb belong to my friend so will not be included but i will include a cast manifold and quadrajet carb. The trans is a turbo 350 that i have installed a new filter and pan gasket on and filled with new tranny fluid. The rear end is a 10 bolt posi out a an 80s camaro that prob needs to be freshend up. Suspension The rear end has a universal 4 link from jegs, and coil overs with panhard bar. The front end is all new from speedway motors with new drop axle, spindles, disk brakes, radius rods, and spring. front and rear are chevy bolt pattern. Other swinging brake peddle with dual reverse mount master cylinders, no brake lines have been run yet. Stearing box is mounted under the dash but needs to be finished, Lokar shifter, i do have the windshiled frame but has not been cut yet. New aluminum radiator. keg shell included for a gas tank. no wiring. NO TITLE! but will include bill of sale. sold as is. if you have any questions please ask! wheels and tires not included but will have rollers (3 are chevy rally wheels) im sure im forgetting alot so once again please ask questions before bidding. sold as is where is located 15 miles south of Amarillo TX Note wheels, tires, intake, and carb not included but will replace. good luck i could not get my pictures to load on ebay so here is a link to more pictures http://s266.photobucket.com/albums/ii280/mrobvious34/1930%20Model%20A/